HOW TO Use Guide
The TNU range is a flexible product, and can be applied in a number of different ways. We have attached step by step instructions for each of the cuts here.
Below are a few additional tips on how to apply.
- Start by preparing the nail like you would with any other enhancement. This includes filing, buffing, prep the cuticles and shaping the nail. If you are working with artificial nails, make sure to first apply the artificial nail to the finger before moving forward with the wrap.
- If using a Gel overlay, it is optional to apply a base coat of Gel before applying the wrap. This helps in securing the wrap to the nail as Gel on Gel creates a stronger hold.
- A top coat this is not necessary (especially with the Get Nailed line), we have customers who have had the TNU wrap last for 6 weeks with no glue, top coat or covering of any kind. Some just glue the free edge, some apply a full overlay such as Gel or Acrylic.
- Heat the back of the wrap with a hair-dryer or heat-lamp to activate the adhesive. Place your finger close to the clients finger so you can sense the level of the heat. Use an on-off motion if the heat is too strong.
- Position one side of the adhesive to the nail so it is in position and ready to be secured flat to the nail. Then apply additional heat before laying the adhesive over the nail. Place your finger close to the clients finger so you can sense the level of the heat. Use an on-off motion if the heat is too strong.
- While the adhesive is still active (ie it is still hot and has not settled) it is possible to re adjust and align the wrap to ensure a perfect fit. This can include lifing the wrap from the nail to reposition if there are wrinkles or uneven placement.
- Use an orangewood (or similar) stick to smooth out any bubbles, lumps or imperfections on wrap.
- Use cuticle scissors or similar to clip off the excess size of the wrapper.
- Continue to smooth with orangewood stick.
- Hold the wrap down and file to bring the wrap to the edge of the nail.
- If using Gel, buffing the top of the design to remove some of the shine will help the Gel to stick to the wrap – as Gel does not stick to gloss well.
- Seal with your chosen clear overlay (Gel or Acrylic). Make sure you seal ALL edges of the wrap to prevent the wrap edges from curling.
- If necessary, a thin layer of glue can be applied to the tip of the nail where you have cut and filed the wrap.
- Once sealed with Acrylic or Gel, file and buff nails as necessary.
- A top coat can be applied for additional shine
And that’s it! Enjoy your new, stunning Designer Nails.
For step by step instructions with pictures, take a look at the our instructions for the individual ranges.
How to use – Professional Cut
How to use – Get Nailed
How to use – Foot Fetish
